Anybody run shorty's on a 35 ZR with 496's ?

Bringing this one back as I’ve wondered the same. Also what the X dim is on a 496 boat without the ITS boxes vs a 525 boat with the ITS boxes...

I did find out, the 35zr with 496's and Bravo 1 X drives, have a 1/2" spacer from the factory. Going to remove the spacer and test.

1/2” spacers with sport master lowers or standards? Most of the 496 35s I see have standard lowers... must be a pretty high X then?

Bravo X drives

Did you take the spacer out already? Results?

I did, haven't run the boat yet, has to warm up.

Just tried a 35ZR with two 496 HO and Raylar with an Imco 2" shorty and 1 1/2" spacer without boxes: it is extremely hard to get out of the water - not recommended at all.