14-1/2 x 26 four blade props for #6 drives
11-11-2019 | 08:19 PM
#1
Thread Starter
Banned
Joined: Feb 2009
Posts: 725
Likes: 1
14-1/2 x 26 four blade props for #6 drives
114-1/2 x 26 counter rotation props for #6 drives or 3A’s. $1,200. For the set . Calls preferred 727-243-2219 was told they are Rolla props but I can’t find Rolla on the props anywhere 
11-12-2019 | 08:43 AM
#2
Registered
Joined: Apr 2013
Posts: 203
Likes: 0
From: Lake Winnebago
25 spline does not fit a #6, #3A or #5....The merc units are a 26 spline and the rear hole is round (cannot see the splines from the rear of the prop).
25 spline is a "typical" rolla shaft interface.
Hope this helps
I would have jumped on these if they fit a #5.
25 spline is a "typical" rolla shaft interface.
Hope this helps
I would have jumped on these if they fit a #5.
