Avanti Boats in N.J.?
11-08-2002 | 12:28 PM
#2
Registered
Joined: May 2001
Posts: 1,485
Likes: 0
From: Minnesota
11-08-2002 | 12:30 PM
#3
Toxic FORMULA
Joined: May 2002
Posts: 4,238
Likes: 1
From: pitman nj
I knew one guy who removed the Avanti logo from the engine hatch and tried to pass it off as a Cig. The boat never sat in the water level. always listed to port 
.When running it always needed more tab on the left , even when he was by himself. I have a friend who just lost his to the bank 
. He wasn't too upset since he had glass and stringer issues in the cabin where the waterline would be on a normal plane. Cracks in the glass and stringers coming loose from the hull.
Repair estimates were $5000 to $6000. Both boats were built in the early 90's.
Maybe thing have improved some by now
.When running it always needed more tab on the left , even when he was by himself. I have a friend who just lost his to the bank . He wasn't too upset since he had glass and stringer issues in the cabin where the waterline would be on a normal plane. Cracks in the glass and stringers coming loose from the hull.Repair estimates were $5000 to $6000. Both boats were built in the early 90's.
Maybe thing have improved some by now
11-08-2002 | 01:03 PM
#5
Registered
Joined: May 2002
Posts: 1,175
Likes: 0
From: St Johns, FL
These kits are basically unfinished\unrigged avanti hulls......I've never seen one on the water here in NJ.
KITS
from their website:
Anyone have any info on this claim???
KITS
from their website:
Avanti has been two time consecutive National High Points Champions in the Factory division of the US Offshore Racing Association..
11-08-2002 | 05:07 PM
#9
Registered
Joined: Aug 2001
Posts: 573
Likes: 0
From: Gainesville Fl.
dmhoj your right who would want anything that looks like that hell look how long it looks,you know who would want a 27' boat to look like a 32' or a 32 to look like a 38 have glassed the top deck to the bottom hell just adds more weight right and why would anyone want 24* on a offshore boat that's just crazey.Also why would you only have a 7' beam man if you and your friends have a fat ass then you will have turn sideways to fit,and lets not forget that the boat slices through the ruff stuff that's no fun and flys level and has a good CG.I know I will never buy one of those ugly, good handeling fun to fly things that they call a boat!Well maybe not till I can find away to distroy this 27'AVANTI
Last edited by FloridianSon; 11-10-2002 at 09:30 AM.
