I’m getting my 242 back together
05-11-2020 | 08:28 PM
#1
Thread Starter
Registered
Joined: Jun 2018
Posts: 420
Likes: 35
From: Michigan
I’m getting my 242 back together
Swapped in a 350 Mag MPI. I had to bump up to 4” exhaust. I bilgekoted it. Moved the batteries under the rear seat. I’m adding switchable mufflers. Need to drill the hole for the air line fitting and plumb them yet. Ready to fire it up as soon as these mid 20 deg nights are over.
I know it’s not a fire breathing big block but it’s turning out pretty good. Just making it my own.
Last edited by Alwhite00; 05-11-2020 at 09:23 PM.
05-12-2020 | 09:33 AM
#2
Registered
Joined: Sep 2008
Posts: 460
Likes: 31
Swapped in a 350 Mag MPI. I had to bump up to 4” exhaust. I bilgekoted it. Moved the batteries under the rear seat. I’m adding switchable mufflers. Need to drill the hole for the air line fitting and plumb them yet. Ready to fire it up as soon as these mid 20 deg nights are over.
I know it’s not a fire breathing big block but it’s turning out pretty good. Just making it my own.
