Looking to buy a Cig 20.... What ya got
05-29-2020 | 09:30 AM
#1
Thread Starter
Gold Member
Joined: Jun 2006
Posts: 140
Likes: 0
From: loto 4mm
Looking to buy a Cig 20.... What ya got
I've been on the hunt for a good cig 20 project for a while now, but have not had much luck. I would prefer a solid boat that is ready for a complete restoration. I have found some nice restored boats, but hate to tear out someone else's hard work to make it how I want. Open to suggestions....
05-29-2020 | 09:44 AM
#2
Platinum Member
Joined: Jan 2005
Posts: 1,156
Likes: 518
From: Owen Sound Ont.
There is one up here
https://www.kijiji.ca/v-powerboat-mo...tte/1502870187
But until the boarder opens up, can't get here from there
https://www.kijiji.ca/v-powerboat-mo...tte/1502870187
But until the boarder opens up, can't get here from there
Last edited by resurrected; 05-29-2020 at 03:23 PM. Reason: I'm a crappy typist and worse at proofing
05-30-2020 | 12:01 PM
#5
VIP Member
Joined: Dec 2001
Posts: 10,397
Likes: 402
From: Cape Coral, Florida
I've been on the hunt for a good cig 20 project for a while now, but have not had much luck. I would prefer a solid boat that is ready for a complete restoration. I have found some nice restored boats, but hate to tear out someone else's hard work to make it how I want. Open to suggestions....
__________________
Happily retired and living in Heavens waiting room.
Happily retired and living in Heavens waiting room.
05-31-2020 | 07:21 AM
#8
Registered
Joined: May 2013
Posts: 15
Likes: 1
From: gibarltar michigan
20 ft cig
I've been on the hunt for a good cig 20 project for a while now, but have not had much luck. I would prefer a solid boat that is ready for a complete restoration. I have found some nice restored boats, but hate to tear out someone else's hard work to make it how I want. Open to suggestions....
