I am preparing to rebuild a pair of Gen VI 502 marine engines and am looking for a competent machine shop to deal with in Michigan or near by. Any recommendations or warnings are appreciated.
Thanks.

Dave Wesseldyk @ Wesco Racing Engines

https://www.wescoracingengines.com/

Tyler Crockett Marine Engines

Frank McComas- Scorpion Racing Engines

Sterling Performance Engines

X2 Frank McComas- Scorpion Racing Engines..

X3 for Frank

performance engineering in jenison did mine. they have been around forever and know boat engines.

btw, still have not regretted using the other guy that told me i would regret pissing him off.

Crockett or Dynamic speed and marine

Hold up. You can’t leave us hanging with just that. Now I’m very curious.

Thanks for the input. Maybe I should have explained in the original post that I plan to assemble the engines myself. It appears a lot of the big name marine engine builders only want to do the entire project, not just the machining.

Here is what I have found with the input so far.

• Wesco Racing doesn't want to do just the machining.
• Scorpion Racing Engines doesn't appear to exist any longer.
• I had experience with Tyler Crockett in the past and prefer to deal elsewhere.
• I spoke with Performance Engineering and they sound like a reasonable option but are backed up.
• I haven't been able to speak with the person at Sterling yet as they are only available 9-3.
• I haven't had a chance to talk with Dynamic Speed and Marine.

Thanks for the input and let me know if there are other good options for machining.