Does Corsa still make boats? I understand that they made the Martinis as well.
11-20-2002 | 02:32 PM
#1
Thread Starter
Registered
Joined: Sep 2002
Posts: 592
Likes: 0
From: Brussels, Ont. CAN. Landlocked between Lake Huron, Ontario and Erie
Does Corsa still make boats? I understand that they made the Martinis as well.
I've almost closed a deal on a 1986 30' Corsa up here in Canada. Word around the campfire has it that it belonged to someone who ran guns from Florida to Cuba until he was shot. Apparently, the hull was built with an inner liner to make it a little more seaworthy while running with a few bullet holes in it. (so it would at least make it to shore for an on foot getaway)
The cuddy has two makeshift cots up front and loads of storage. Powered by triple outboards at one point and the hull is said to be Kevlar. Any info would be greatly appreciated!
Later
The cuddy has two makeshift cots up front and loads of storage. Powered by triple outboards at one point and the hull is said to be Kevlar. Any info would be greatly appreciated!
Later
11-20-2002 | 04:20 PM
#2
Registered
Joined: Jan 2002
Posts: 1,405
Likes: 1
From: OAKVILLE, Ontario
miami
was at their place about 4 years ago they are building a 41 and some fishing boats. Great guys, nice work, but why would a drug boat story induce you to buy a boat. They still build lots of drug boats in Fla and still put lots of holes in em when the good guys arrive on scene. Cripple triples is the storyline. Center engine takes a beating in the ocean
11-20-2002 | 05:11 PM
#3
Platinum Member
Joined: Apr 2001
Posts: 10,833
Likes: 18
From: Beautiful Fort Lauderdale www.cheetahcat.com
The 30 Corsa was a good Race boat in its day I believe it was National Champion M Class in 78 (Cocktails) Tom Murphy/ Paul Haggerty
They had two deck molds one a race deck the other was raised.
The 32 Signature was a 30 Corsa with a two foot Stretch by Tommy Adams. If memory serves correctly!
Also the Corsa Hull plug was done by Nick Chapman.
I always liked the high freeboard of the Corsa remember in those days the competition consisted of the 27 Magnums and 28 Cigarettes those were low freeboard and with a race bolster you were well above the deck
They had two deck molds one a race deck the other was raised.
The 32 Signature was a 30 Corsa with a two foot Stretch by Tommy Adams. If memory serves correctly!
Also the Corsa Hull plug was done by Nick Chapman.
I always liked the high freeboard of the Corsa remember in those days the competition consisted of the 27 Magnums and 28 Cigarettes those were low freeboard and with a race bolster you were well above the deck
11-20-2002 | 05:25 PM
#4
Thread Starter
Registered
Joined: Sep 2002
Posts: 592
Likes: 0
From: Brussels, Ont. CAN. Landlocked between Lake Huron, Ontario and Erie
Hey Kid, first off, this boat was an alleged 'GUN RUNNER', not a drug running boat.(like it matters) I would never consider buying a boat based on 'all the hype'. What originally drew me to this boat was the fact that it was sitting beside a garage 75' from the highway for at least 5 years before I eventually took the notion to stop in one fine day. I would like some history on this company. Thanks
P.S. Nice boat Kid!
Steve,thanks for your input as well!
I believe this particular hull would fit into the 'raised' category.
P.S. Nice boat Kid!
Steve,thanks for your input as well!
I believe this particular hull would fit into the 'raised' category.
