Off work!!! Time to work on boat!!
12-12-2021 | 07:43 AM
#1
Thread Starter
Registered
Joined: Aug 2018
Posts: 4
Likes: 0
From: PA,NJ,NV,AZ,WY,OK,SD,ND,MN
Off work!!! Time to work on boat!!
Would like suggestions please, I have a;
Merc Racing Props, Bravo 1 40' Profile Offshore, Twin 500CIDs Naturally Asperated.
I have Merc Racing Bravo 1 props
4 Blade Port SN= 48-831914-26P-RH
Star SN=48-831913-26P-LH
She runs at 4400rpm Full throttle Redline is 5000, Merc Guy says go to 24P for +300 prm or 22P for another 300rpm I think the 24s would be optimal and still get me out of hole, as she is a little sluggish getting up now but very manageable.
Any suggestions would be appreciated and if anyone knows where to get some "New" props that would do the trick.I do not want used or refurbished as of now.
Thanks
VJL
Merc Racing Props, Bravo 1 40' Profile Offshore, Twin 500CIDs Naturally Asperated.
I have Merc Racing Bravo 1 props
4 Blade Port SN= 48-831914-26P-RH
Star SN=48-831913-26P-LH
She runs at 4400rpm Full throttle Redline is 5000, Merc Guy says go to 24P for +300 prm or 22P for another 300rpm I think the 24s would be optimal and still get me out of hole, as she is a little sluggish getting up now but very manageable.
Any suggestions would be appreciated and if anyone knows where to get some "New" props that would do the trick.I do not want used or refurbished as of now.
Thanks
VJL
