Mefi 3
#1
Registered
Thread Starter
Mefi 3
Any interest in a new mefi3? I was flashed for my 468 with 575 blower but can be reflashed by someone with mefiburn. I ended up going with an aem infinity so i no longer need it. 300 obo.
thanks,
nick
thanks,
nick
#4
Registered
#6
Registered
Hi Big ballers,
My Mefi 3 is (supposed) burned and I am trying to replace by an oher one or by a new system as AEM but they haven't Wiring harness pnp. I see that succeed to do this; can I ask you how you did it?
Than you in advance.
My Mefi 3 is (supposed) burned and I am trying to replace by an oher one or by a new system as AEM but they haven't Wiring harness pnp. I see that succeed to do this; can I ask you how you did it?
Than you in advance.
#7
Registered
Thread Starter
-Nick
#8
Registered
Thank you Nick,
It seems not so simple for me because I haven't your technical knowledge.
First I will check if my Mefi 3 is really burnt; do you know a simple to way to be sure that the ECM is powered by 12V?
Thank you
Ancion
It seems not so simple for me because I haven't your technical knowledge.
First I will check if my Mefi 3 is really burnt; do you know a simple to way to be sure that the ECM is powered by 12V?
Thank you
Ancion
#9
Registered
Thread Starter
I used this link here when I was looking at repinning. Looks like j2-1 is the battery input might want to just check for 12v there.
Michael's Tractors (Simplicity and Allis Chalmers Garden Tractors) - Mercruiser MEFI-3 ECM Delphi 16237009
-Nick
The following users liked this post:
Ancion (03-16-2023)