Liberty/AFR Enforcer 335 heads Ferrea Inconel Valves
06-14-2022, 11:51 AM
#1
Liberty/AFR Enforcer 335 heads Ferrea Inconel Valves
I don't know the details of who makes what but these heads are sold under a few different labels including Liberty Performance and AFR. Compare the pictures to what you can find on the interweb if you haven't seen the AFR Enforcer heads for yourself. They are a very nice, very clean casting. The head shop said that the seat work was excellent and as good as anything they have seen. IIRC the casting is about 33.5 pounds bare. $2000
335cc 120cc (I measured the chambers with these valves)
Ferrea 6000 2.25 intake F6190
Ferrea Inconel 1.880 exhaust F1261P
Comp 987 springs 130 seat 360 open
Comp 740 10* superlock retainers
Comp 611 10* superlocks
Comp 4771 locators
Comp 4698 locator
Comp 529 viton seals
ARP 7/16" rocker studs
ARP 135-3607 bolts
335cc 120cc (I measured the chambers with these valves)
Ferrea 6000 2.25 intake F6190
Ferrea Inconel 1.880 exhaust F1261P
Comp 987 springs 130 seat 360 open
Comp 740 10* superlock retainers
Comp 611 10* superlocks
Comp 4771 locators
Comp 4698 locator
Comp 529 viton seals
ARP 7/16" rocker studs
ARP 135-3607 bolts
Last edited by stinkbomb; 06-14-2022 at 12:01 PM.
06-17-2022, 01:11 PM
#2
Originally Posted by articfriends
Really? i had customer send a set to eric weingertner and he pretty much said they were worst chinese garbage he ever seen and to avoid them, he refused to do work to them, they got sent back https://www.youtube.com/watch?v=gCxmdS3S6BY
Last edited by stinkbomb; 06-17-2022 at 01:14 PM.
06-18-2022, 10:20 PM
#3
Platinum Member
Platinum Member
iTrader: (1)
Interesting video but I missed the part where he supposedly said they were horrible junk? Actually somewhere toward the end he says the flow numbers aren't bad. I would hope that AFR wouldn't be pushing junk but who knows about anything in this world anymore. I have seen a pro comp head and one other chinese head, both were light as feathers. The casting finish is better than some of the Dart and Edelbrock heads I have seen over the years but I haven't bought either of those in a while. The machine work was spot on according the shop and I will provide their contact info privately if anyone is interested. I would be using them but diesel is going to be a better fit for my rig.
