Cigarette Triple Verado outboard install (Throttle/Shifters)
#1
Thread Starter
Registered
Joined: May 2001
Posts: 73
Likes: 0
From: Muskegon, Michigan
We are currently rigging a Cigarette with triple 2022 Verado's. Were looking to run them on twin DTS shift and throttles (separate). Were not interested in re-configuring the dash to fit triple throttles and triple shifters. I was told there is a shadow box that allows you to run the three on twin DTS sticks. We currently can't find information on it. Any information would be greatly appreciated.
Thanks in advance.
Thanks in advance.
#2
Yes you will run shadow mode. Do you have your controls & rigging already?
__________________
Marc
www.mercruiserparts.com
www.go-fast.com
www.bammarine.com
www.cyborgtransmissions.com
It's not alive -www.BoatStuffExpress.com - temporarily retired
Marc
www.mercruiserparts.com
www.go-fast.com
www.bammarine.com
www.cyborgtransmissions.com
It's not alive -www.BoatStuffExpress.com - temporarily retired
#3
Thread Starter
Registered
Joined: May 2001
Posts: 73
Likes: 0
From: Muskegon, Michigan
Haven't purchased any rigging just yet. The company that I purchased the engines from are pushing me to purchase the "Next Gen" control shifters for easy install. That style of shifter would wk great on a center console...Not a Cigarette. I currently have purchased engines only at this time. Need throttle and shifters, Wiring from engines forward to helm. Need steering and hose kit. Tie-bar as well.
Last edited by Apache kid; 10-21-2022 at 01:15 PM.
#4
Registered
Joined: Sep 2020
Posts: 22
Likes: 3
From: St Petersburg
If you go to the livorsi website you can see the dts section and it talks about shadow throttles
Livorsi Marine, Inc. - Livorsi DTS Controls- Digital Throttle and Shift
Livorsi Marine, Inc. - Livorsi DTS Controls- Digital Throttle and Shift
#5
Unfortunately the older Mercury rigging kits are no longer made. It is still possible to purchase the individual components however.
What controls do you plan to use? Livorsi would be a good bet. Or looks like the Mercury digital zero effort controls may be available.
In the end you will need someone with the Mercury G3 software to set it up.
What controls do you plan to use? Livorsi would be a good bet. Or looks like the Mercury digital zero effort controls may be available.
In the end you will need someone with the Mercury G3 software to set it up.
__________________
Marc
www.mercruiserparts.com
www.go-fast.com
www.bammarine.com
www.cyborgtransmissions.com
It's not alive -www.BoatStuffExpress.com - temporarily retired
Marc
www.mercruiserparts.com
www.go-fast.com
www.bammarine.com
www.cyborgtransmissions.com
It's not alive -www.BoatStuffExpress.com - temporarily retired
#6
Thread Starter
Registered
Joined: May 2001
Posts: 73
Likes: 0
From: Muskegon, Michigan
Unfortunately the older Mercury rigging kits are no longer made. It is still possible to purchase the individual components however.
What controls do you plan to use? Livorsi would be a good bet. Or looks like the Mercury digital zero effort controls may be available.
In the end you will need someone with the Mercury G3 software to set it up.
What controls do you plan to use? Livorsi would be a good bet. Or looks like the Mercury digital zero effort controls may be available.
In the end you will need someone with the Mercury G3 software to set it up.
We are currently in the process putting a list of needed parts.
It's currently in paint and should be completed soon.
Send me a PM with a number to get a hold of you.
Thanks
Jay




