Im doing a major structural repair on the bottom and side of a boat. Which epoxy is the best per dollar? West System seems to be the best, but is also the most expensive. Other epoxies such as Raka, System 3, MAS and Total Boat, all have great reviews and vary in price. I'll need approx 3 gallons. Any suggestions? Thanks!

I've only used West Systems because of convenience, but I would try Total Boat if I have a chance. I watch a boat repair guy on YouTube that uses both.

Ayuh,..... I've been using Raka for many years,....
No issues,... No problems,....

Thanks for your input! At this point, I'm leaning towards RAKA non blush. $215.00 for 3 gallons.

Check out US Composites

Yes, where I get my gel and glass. Good looking epoxy pricing too.
epoxy.html

I have had very good luck with the Fasco epoxies. Lots of structural work.. stringers, prop pockets etc. predictable, not the cheapest but certainly not as expensive as West.

watch out for amine blush, happens with all epoxies. Wash the cured and sanded (finished) area throughly with soap and water before painting 👍