Promaxx 340 CNC’d heads
11-26-2023 | 06:37 PM
#1
Thread Starter
Registered
Joined: Mar 2014
Posts: 68
Likes: 4
Promaxx 340 CNC’d heads
Promaxx 340 CNC’d heads complete
Tyler Crockett assembled the heads.
I ran a 139651 cam with these that he set up
the springs for.
I have 2 sets with 56 hr’s on them.
2.30 Manley intakes valves
1.88 Inconel exhaust valves
2 sets 9.8 Dart intakes that were port matched to the
heads.
Each set of heads an 1 intake 3500$ BO.
6500$ for both sets of heads an intakes.
PM me for any ? An photos
Tyler Crockett assembled the heads.
I ran a 139651 cam with these that he set up
the springs for.
I have 2 sets with 56 hr’s on them.
2.30 Manley intakes valves
1.88 Inconel exhaust valves
2 sets 9.8 Dart intakes that were port matched to the
heads.
Each set of heads an 1 intake 3500$ BO.
6500$ for both sets of heads an intakes.
PM me for any ? An photos
Last edited by chancer540; 11-26-2023 at 06:56 PM.
