Mufflers for 5" dry tailpipes
01-17-2024 | 10:20 AM
#1
Thread Starter
Offshoreonly Advertiser
Joined: Mar 2001
Posts: 2,517
Likes: 279
From: Pompano Beach FL, USA
Mufflers for 5" dry tailpipes
A pair of mufflers that I made for my BAM Cigarette which had Y pipes and 5" tailpipes. Water exit was via a hole on the top of the tail pipe.
These mufflers slide over the tail pipe and the water exits through the muffler. Had to notch them to clear my extension boxes.
Extremely effective, no detectable power loss even when closed with the both the 850 HP tunnel ram and 1000 HP blower engines I had.
Basically the design used in Gaffrig mufflers. Jim (rip) and I originally sketched them out on a napkin while sitting at Bootleggers. These are big - 8 1/8 OD by about 16 long & little ugly. However they kept us out of trouble with the local po-po.
$500 for the pair.
These mufflers slide over the tail pipe and the water exits through the muffler. Had to notch them to clear my extension boxes.
Extremely effective, no detectable power loss even when closed with the both the 850 HP tunnel ram and 1000 HP blower engines I had.
Basically the design used in Gaffrig mufflers. Jim (rip) and I originally sketched them out on a napkin while sitting at Bootleggers. These are big - 8 1/8 OD by about 16 long & little ugly. However they kept us out of trouble with the local po-po.
$500 for the pair.
Last edited by Mbam; 01-17-2024 at 10:26 AM.
