Steering wheel unit removal ? How to
09-02-2024 | 07:05 AM
#1
Thread Starter
Registered
Joined: Sep 2024
Posts: 2
Likes: 0
From: Manorville NY on Long Island
Steering wheel unit removal ? How to
I have a seal leak behind the steering wheel seams to be the seal on shaft just behind the mount. I have the wheel off there’s an aluminum block there with 3 bolts. I removed those. But sorting else must need to be removed. There’s a threaded hole below 3/8 thread maybe
Is there a Bolt or something I need to push to release. The piece.
I can see there is a warlock performance marine sticker on the unit below.cant see model # or anything else. I will also need to find a seal kit. Any help would be great.
This is on a newly purchased 2002 Donzi ZX 38
How do I attach photos to post on here?
TY Chris
Is there a Bolt or something I need to push to release. The piece.
I can see there is a warlock performance marine sticker on the unit below.cant see model # or anything else. I will also need to find a seal kit. Any help would be great.
This is on a newly purchased 2002 Donzi ZX 38
How do I attach photos to post on here?
TY Chris
