SSM V Drives, Extension Boxes w/ gimbals, Latham wing plates, 3” drive spacers
03-02-2025 | 07:41 PM
#1
Thread Starter
Registered
Joined: Oct 2015
Posts: 99
Likes: 175
From: Long Branch NJ
SSM V Drives, Extension Boxes w/ gimbals, Latham wing plates, 3” drive spacers
Drives are 1.48 ratio. One drive has new u joints and prop shaft. The other has some slight corrosion on prop shaft but nothing major. Both spin freely and have clean oil. Skegs are in good shape.
The boxes and gimbals are clean have little to no corrosion.
Was going to put this set up on my 38 Cig but going a different route. They came off a 38 Cig as well.
Rather not separate but..
16k for the drives
6k for the boxes and wing plates
20k takes it all.
Located in NJ. Can arrange shipping on buyers dime.
The boxes and gimbals are clean have little to no corrosion.
Was going to put this set up on my 38 Cig but going a different route. They came off a 38 Cig as well.
Rather not separate but..
16k for the drives
6k for the boxes and wing plates
20k takes it all.
Located in NJ. Can arrange shipping on buyers dime.
