Tiger Vents
#1
Where do these vents go? Are they for engine air intake?
I can look in there and see raw fiberglass but are they molded into a drain or intake that runs back to the engine bay?
im getting water leaking over to the cooler area and that is not alright with me. I’m pissed.
I can look in there and see raw fiberglass but are they molded into a drain or intake that runs back to the engine bay?
im getting water leaking over to the cooler area and that is not alright with me. I’m pissed.
#3

Sorry - got sidetracked. I was talking about the 2 large intake vents in front of the CIGARETTE block script just in front of the windshield. Stole this photo from the internet of a boat that I assume has small blocks in it……..
#4
I know that boat well. It has Pontiac Tech-4s with eBay turbos.
#6
Registered

Joined: Nov 2014
Posts: 330
Likes: 148
I’m not sure about the vents, I’ll text the owner.
#7
Registered

Joined: Aug 2012
Posts: 2,301
Likes: 404
From: Collierville, TN and Pickwick Lake
Those ducts pressurize the cockpit to ensure adequate ventilation for the crew at speeds in excess of 90 mph. You can just block yours off as they will serve no purpose in your application.
#8
Registered

Joined: Aug 2012
Posts: 2,301
Likes: 404
From: Collierville, TN and Pickwick Lake
Where do these vents go? Are they for engine air intake?
I can look in there and see raw fiberglass but are they molded into a drain or intake that runs back to the engine bay?
im getting water leaking over to the cooler area and that is not alright with me. I’m pissed.
I can look in there and see raw fiberglass but are they molded into a drain or intake that runs back to the engine bay?
im getting water leaking over to the cooler area and that is not alright with me. I’m pissed.
Last edited by payuppsucker; 08-20-2025 at 02:45 PM.





