Building a Drop in Bolster
02-23-2003 | 09:03 AM
#1
Thread Starter
Charter Member #655
Joined: Dec 2000
Posts: 4,939
Likes: 1
From: Holland, Michigan
Building a Drop in Bolster
Well I got out to the boat yesterday made some templates and took some measurements. anyone have pictures of your seats before ulpostery (spelling)? I'd love to see how the sides are put together mine are about 3" wide without the padding another 1" so I think to keep from making the thing weigh a ton I'll put two pieces of plywood together with a pine or poplar spacer between to make up the 3". Once I get the framing assembled I'll coat it with resin to keep it from rotting then bring it away to get upolstered....any input would be great!!!!
dyno
dyno
__________________
If your boat has a sail do you ride a horse to the ramp?
If your boat has a sail do you ride a horse to the ramp?
