looking for the specs for a 496
05-22-2003 | 10:19 PM
#1
Thread Starter
Team Dysfunctional
Joined: Jan 2001
Posts: 1,420
Likes: 0
From: Bolton Landing NY
looking for the specs for a 496
I am looking for a web site with the complete break down of a 496 marine engine. I want to find out how they are assembled and what the cam, piston valve, fuel injection and ignition specs are.
05-22-2003 | 10:50 PM
#2
Platinum Member
Joined: Feb 2002
Posts: 41
Likes: 0
From: Va
Hot boat,
If you're looking for a 496, let me know. I have a bunch of low hour (under 36 hrs.) 496's for sale. I can tell you that GM uses Hypereutectic pistons 7/16's rods and Nitrated nodular iron rolled fillet cranks in them. The set up is supposed to be good for up to 600 hp. They make over 500 lb/ft in stock trim also.
Talk to you later,
If you're looking for a 496, let me know. I have a bunch of low hour (under 36 hrs.) 496's for sale. I can tell you that GM uses Hypereutectic pistons 7/16's rods and Nitrated nodular iron rolled fillet cranks in them. The set up is supposed to be good for up to 600 hp. They make over 500 lb/ft in stock trim also.
Talk to you later,
Thread
Thread Starter
Forum
Replies
Last Post
TeamPSI
General Q & A
23
12-10-2007 05:23 PM
