Thought you Hustler fans should know.

Look at page 74 of July 2003 powerboat magazine.
Notice the March 1985 cover issue its a Hustler
32 le. It ran 103mph with 526 big blocks
pushing 630 hp the boat weighed 7500 lbs.
Arneson surface drives.
Here is a picture of the stern of the 1985 Hustler
32le

That is one bad xss MACHINE!!! I wonder what size the props are "cleavers" whatsize and pitch any ideas? Darin

Nice, do you have any more pics?

The props pictured are 17x30 rollas.
The powerboat magazine test in 1985 refers to 17 1/2
x 28 rollas. although the prop shaft center to center distance is
only 18 inches. Not much room for a lazy trim cylinder.

another look

notice duplicate set of gauges at port. this was for the powerboat
test...

very cool ALL boats should have this feature. even though its best to be the Driver!!!!

Thanks CaveMan
Darin

Nice ride. Although 32's were never produced in big numbers, it's surprising how many from mid-80's that surface that are set up with the surface drives.

how would you like to beat your eggs with these eggbeaters???

That's one hell of a setup/niceeeeeeeeee