BRAVO-ONE LABBED BY Houston Prop
01-08-2004 | 08:48 PM
#6
Thread Starter
Registered
Joined: Jul 2002
Posts: 1,387
Likes: 0
From: Houston,texas
STEELWARE
hello Jeff,we can do what ever you want.
if you say polish the prop,it will look as good as the one in the post ABOVE.
or, we can paint the prop
To match your new outdrive
if you say polish the prop,it will look as good as the one in the post ABOVE.
or, we can paint the prop
To match your new outdrive
Last edited by HOUSTONPROP; 01-14-2004 at 12:03 AM.
01-11-2004 | 01:03 AM
#10
Registered
Joined: Feb 2002
Posts: 6,656
Likes: 20
From: Lake Michigan
How many rpms and mph could be expected out a lab job? Do you thin the blades and blue print them, balance the prop?
I have out of the box 26 B1's on 1.3 Bmaxs turning out, motors turn 5100/90mph, would like 5500/95mph.
Conventional V...heavy boat.
Or would you also have to bend them back to 25 or so?
I have out of the box 26 B1's on 1.3 Bmaxs turning out, motors turn 5100/90mph, would like 5500/95mph.
Conventional V...heavy boat.
Or would you also have to bend them back to 25 or so?
Last edited by Back4More; 01-11-2004 at 01:06 AM.
