Has anyone removed the rear bench in a 29' outlaw? I need to get at the front side of the engines and I don't want to pull drives and engines. Any advice or pictures would be great. Thanks

What are you trying to do?

cam swap

About 10 bolts and 5 screws on a 24 OUtlaw...probably not a whole lot different on a 29. Takes about 1/2 hours to get it out, can be a little tricky getting it out of the boat

Need to disconnect the hatch rams and general wiring....Remember the speaker wires too.....

When I had the engines out of
my old 29, I took out the bolsters,
to get the side cushions out, then
the back seat removes with screws
and bolts.

jt