Extreme Marine Swim platforms
#2
Not sure about your request Joey, but Eric Garrett, formerly of Woodbridge, also, CheckmateF1 on OSO, had Extreme Marine make a black full transom platform for his 89 25 Convincor. Top was thru bolted; and the bottom was lagged. This is a pic of it:
#3
Thread Starter
Registered

Joined: Sep 2002
Posts: 2,093
Likes: 165
From: King george, Virginia/Potomac River
Thanks Brain, I was just getting ready to e-mail him for some pics. As you can remember, my C-mate had the factory (ugly as hell) platstic squared off steps on each side of the transom. My only complaint of Checkmates back then is the Bayliner looking swim platforms they used. Do you have any pics of Eric's boat in the water?
#4
I should, but will have to search tonight. Suffice to say, that platform was perfect, and he was very happy with it. They used the supports on the side as a ladder.
I do not think you will like separate steps on either side of the drive. Aggressor 25/Ty had them on his old 25 Sunsation, plastic ones similar to yours, and he was not happy as they were not very useful, and offered no protection for staying away from the drive/prop.
I do not think you will like separate steps on either side of the drive. Aggressor 25/Ty had them on his old 25 Sunsation, plastic ones similar to yours, and he was not happy as they were not very useful, and offered no protection for staying away from the drive/prop.
#5
Thread Starter
Registered

Joined: Sep 2002
Posts: 2,093
Likes: 165
From: King george, Virginia/Potomac River
How far was Eric's from the waterline while at anchor? While sanding on mine on Saturday I was looking at the exhaust placement and it looks like a full length platform would end up being 2 feet (an exaggeration but you get what I'm talking about) from the water to clear the exhaust tips. I'm not a big fan of that look. I'm also not a big fan of a platform below the exhaust.
Last edited by Shah Mat; 03-22-2004 at 12:30 PM.
#6
Shah, I don't mean to talk bad about Extreme, but the swim platform I bought from them is powdercoated. The areas where the bolt heads rub against the platform started to corrode and bubble. This wasa little disappointing since I've only had it three years.
Because I had a brain-fart last summer and bent it, I am now stripping the whole thing, and will use paint the second time around. It's much easier to repair if something happens. The powdercoating they use is some tough chit - I've spent days scrapping and stripping and I'm still not done yet..
just my $.02..
Because I had a brain-fart last summer and bent it, I am now stripping the whole thing, and will use paint the second time around. It's much easier to repair if something happens. The powdercoating they use is some tough chit - I've spent days scrapping and stripping and I'm still not done yet..
just my $.02..
__________________
Steve Gresham
'03 Donzi 33ZX
Steve Gresham
'03 Donzi 33ZX
#9
Shah Mat,
What size Check do you have.. This is a pic of mine in the water, it used to be 28', now a 30' it grew while I was asleep.. And yes it is an Extreme Marine and when the powercoat starts to fall off, it will be sand blasted and painted, but I hope not soon.. So far so good!!
Dick
What size Check do you have.. This is a pic of mine in the water, it used to be 28', now a 30' it grew while I was asleep.. And yes it is an Extreme Marine and when the powercoat starts to fall off, it will be sand blasted and painted, but I hope not soon.. So far so good!!
Dick


