2003 Sonic 358
#1
Thread Starter
Registered
Joined: Jan 2001
Posts: 283
Likes: 0
From: Fredericksburg, VA
Said "GOOD-BYE" to the never ending Active Thunder 33AVH project, and my 31' Formula PC, the "go-slow" performance cruiser, and picked up this at All-Pro Marine this weekend.
(sorry Sydwayz-Brian, I know you were looking at this for a while, but I know you'll love a Top Gun much better
(sorry Sydwayz-Brian, I know you were looking at this for a while, but I know you'll love a Top Gun much better
#3
Thread Starter
Registered
Joined: Jan 2001
Posts: 283
Likes: 0
From: Fredericksburg, VA
Yeah- i hear it was painted a couple of times by the original owner, but for the most part it's a good job. The boat is still up in Annapolis,MD for some touch up on the paint around the air vents, and some items on my punch out list.
Waiting for Myco to finish my trailer to pull it down to VA.
Waiting for Myco to finish my trailer to pull it down to VA.
#5
Its got 500EFIs, and mostly white interior with blue accent. Its REALLY pretty.
I don't think the paint thing is a bad deal. The builders/original owners are members of OSO. I was told by Frank that the original paint, just did not look right. It was attempted to be 'fixed' which did not work well either. The boat was then fully prepped and painted with the paint you see now. Judging from that painter's other works; several done at O-P in Maryland, you will have nothing to worry about.
Adam, I am glad you are ditching that Rocket trailer too, er cart, or whatever you want to call them.
I don't think the paint thing is a bad deal. The builders/original owners are members of OSO. I was told by Frank that the original paint, just did not look right. It was attempted to be 'fixed' which did not work well either. The boat was then fully prepped and painted with the paint you see now. Judging from that painter's other works; several done at O-P in Maryland, you will have nothing to worry about.
Adam, I am glad you are ditching that Rocket trailer too, er cart, or whatever you want to call them.
Last edited by Sydwayz; 04-19-2004 at 11:21 AM.
#7
Adam, open them in Paint. (right click, open with MS Paint, and then, go to IMAGE, then SKETCH/SKEW, and lower the aspect ratio for verticle and horizontal equally. Resave and repost.
I sent you a PM.
I sent you a PM.



