Just ran a brand new 320 velocity!
04-21-2004 | 11:17 AM
#7
Registered
Joined: Dec 2002
Posts: 4,815
Likes: 42
From: 1000 Islands
it's a fast...fast hull. My 32' would run 77 and change on 454 carb mags w/ out of the box hydros, and a reasonable X. The 502 EFI boats would run over 80. The 496/425 is strong, and some tweaking of setup has been done since I knew that hull...so totally believable. 
BTW, to pull down those kind of numbers...obviously a "Velocity driver " behind the wheel! The avg. Joe would never have made 80 mph! At least not without soiling himself! Yea, real big wheels. Mike, I'm humbled by your kind words!!! 
Where's Mr. Velocity...he's gonna chit!
BTW, to pull down those kind of numbers...obviously a "Velocity driver " behind the wheel! The avg. Joe would never have made 80 mph! At least not without soiling himself! Yea, real big wheels. Mike, I'm humbled by your kind words!!! Where's Mr. Velocity...he's gonna chit!
Last edited by Rippem; 04-21-2004 at 11:22 AM.
04-21-2004 | 09:34 PM
#8
Thread Starter
Registered
Joined: Apr 2003
Posts: 1,838
Likes: 0
From: Punta Gorda
Reckless32 We spun the 32s at 4900 rpms. It had a light load of fuel 1/4 tank. It leaps on plane. And no Im a 390 guy.Im just setting it up. Mike from Hulls prop. is bringing down a set of 5 blade hydros Friday .
Thread
Thread Starter
Forum
Replies
Last Post
Velocity Tom
General Boating Discussion
9
07-31-2004 12:48 PM
