Still looking for a 10 Qt Mark IV oil pan
05-12-2004 | 11:48 PM
#2
Team Dysfunctional
Joined: Jan 2001
Posts: 1,420
Likes: 0
From: Bolton Landing NY
I have one for a one piece rear seal. It has a baffle in it . I am not sure if it was a offshore style or a jet boat style. I had it on my motor but at high rpm the oil would splash around to much and I would loose oil pressure and my oil temp went high. I took it off and everything was fine. It is a Dooley. I don't have the pickup. some dumb ass engine builder I used once lost it on me. they installed the stock pickup instead. that might of been my problem.
__________________
If it aint broke .... I can break it....
If it aint broke .... I can break it....
05-13-2004 | 06:21 AM
#3
Registered
Joined: Oct 2000
Posts: 1,782
Likes: 1
I have a 14 qt GIL pan that I want to get rid of, I don't the pick-up for the oil pump though. Call me if you're interested. It came off my bowtie tall deck of '91 vintage, not real sure what generation that would make it.
Robert
770-720-3241 H
770-363-2185 C
Robert
770-720-3241 H
770-363-2185 C
Last edited by Tonto; 05-13-2004 at 06:23 AM.
