Still wrenching. Slowly but surely step by step inch by inch.
06-20-2004 | 10:29 AM
#1
Thread Starter
Registered
Joined: Nov 2002
Posts: 3,029
Likes: 2
From: Bonita Springs, Florida
Still wrenching. Slowly but surely step by step inch by inch.
Here is an update with some more pics for those who are interested.
Finally have the drives hung and the steering cylinders should be connected Monday.
Engines still need the new braided hoses installed. They were to be shipped back last week.
Finally have the drives hung and the steering cylinders should be connected Monday.
Engines still need the new braided hoses installed. They were to be shipped back last week.
Last edited by expresscat39; 06-20-2004 at 10:44 AM.
06-20-2004 | 10:40 AM
#3
Thread Starter
Registered
Joined: Nov 2002
Posts: 3,029
Likes: 2
From: Bonita Springs, Florida
Re: Still wrenching. Slowly but surely step by steip inch by inch.
Starboard Drive
Shot of dash with all new gauges and new hub for new wheel installed. OE had used a hydraulic steering system (treactor type) with a tapered shaft. A pain to get machined to fit the new hub and wheel. Azimuth compass on order but is on BO until end of July.
Hew headliner and new tunnel covering being installed. The mirror is just stuck up there for the time being.
Shot of dash with all new gauges and new hub for new wheel installed. OE had used a hydraulic steering system (treactor type) with a tapered shaft. A pain to get machined to fit the new hub and wheel. Azimuth compass on order but is on BO until end of July.
Hew headliner and new tunnel covering being installed. The mirror is just stuck up there for the time being.
