desk top dyno my 400sb please
09-30-2004 | 10:14 PM
#1
Guest
Posts: n/a
desk top dyno my 400sb please
bore 4.155"
stroke 3.75"
rod length 5.565"
comp. 9.5:1
stock cam 200i/[email protected]" .427"i/.437"e valve lift with 1.6:1 rockers 110*lsa,108*lc int.112*lc ex.
heads pro topline torker 1.94"/1.5"
gm cast iron Z-28 high-rise intake
carter afb 750cfm
stock type glm exaust
stroke 3.75"
rod length 5.565"
comp. 9.5:1
stock cam 200i/[email protected]" .427"i/.437"e valve lift with 1.6:1 rockers 110*lsa,108*lc int.112*lc ex.
heads pro topline torker 1.94"/1.5"
gm cast iron Z-28 high-rise intake
carter afb 750cfm
stock type glm exaust
10-01-2004 | 07:43 PM
#2
I hate the winter!!
Joined: Jul 2001
Posts: 2,707
Likes: 0
From: long island, new york
Re: desk top dyno my 400sb please
I would do it for you but my desk top dyno requires more information. I need to enter the exact valve timing numbers off the cam card ( ie: intake valve opens @ xx*, closes @ xx*, exhaust valve opens @ xx*, closes @ xx*) Also the exact flow numbers of the heads will make it more accurate..
