|
Turbine 101
1 Attachment(s)
TURBINES IN A BOAT!
Hello to all my Skater brothers! After all the hard work I put myself through. I realize that most of you must think that I should seek counceling. Well I am! 12 ounces at a time:ernaehrung004: Heres the plan. Remove two good running PSI Blown chevys. INSTALL TWO MARINIZED LYCOMBING T53,s L13B,s TURBINES in a 46 SKATER. PROJECTED TOP SPEED 180MPH+ I took one final picture of the piston engine installation. The removal takes place today! Lets have some fun!:cool-smiley-026: |
You always have the most interesting projects!
Ed |
1 Attachment(s)
Everything disconected and ready.
Gotta love how easy it is to work on these cats. Just waiting for a xtra set of hands. |
met u @ Fall River poker run
Originally Posted by KNOT-RIGHT
(Post 2280760)
Hello to all my Skater brothers!
After all the hard work I put myself through. I realize that most of you must think that I should seek counceling. Well I am! 12 ounces at a time:ernaehrung004: Heres the plan. Remove two good running Blown chevys. Install two marinized t53 L13b turbines. I took one final picture of the piston engine installation. The removal takes place today! Lets have some fun!:cool-smiley-026: |
Originally Posted by Comanche3Six
(Post 2280811)
You always have the most interesting projects!
Ed Theres plenty of fridge in the beer. |
1 Attachment(s)
Originally Posted by 1CE
(Post 2280845)
Gerry/or/Jerry (1st 1 I believe). Anyways I was on Paul's 33-Sutphen "Outrageous" @ F.R. (the orange boat next to u-guys). Thanks for all the pics from yourself and Art. "Airtime" I think u-are correct a 30 pack may not even cure your endless desire to drive yourself beyond reasonable decision making :cool-smiley-011: best of luck jay "1CE"
The next poker run I gotta bring more beer Atleast two coolers after the run Pete Nopper pretty much cleaned me out.:D Say hi to Paul for me! Why dont you guys stop by also I have the video here. Not the best video however there is some decent footage of outrageous. Here is a picture of the Caliper controller. This is activated by a micro switch in the shift which sends voltage to the coil and the onboard air system will apply air to the cylinder which mechanicaly pushes the master cylinder which squeezes the caliper stoping the N2 on the turbine enabling a shift in and out of forward neutral reverse. |
Originally Posted by KNOT-RIGHT
(Post 2280866)
Ed, your not that far away. The next time your heading this way stop by!
Theres plenty of fridge in the beer. Thanks for the invitation! Too bad I wasn't close by today, I could operate the backhoe. Ed |
2 Attachment(s)
Motors out!
|
Knot-Right, the name couldn't fit any better!!!! Great thread, I liked the first build, I think the next build thread will be even better. Good luck on the conversion, if I was closer I'd help ya with the beer, and the project.
|
In the end, you will be far better off doing this than you could imagine.
It just takes one major concern off your mind when boating. |
| All times are GMT -5. The time now is 10:45 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.