Skater Full Cover
 

I am looking for somebody to build a lightweight Non Towing Full Cover for my 2006 36' Classic Deck. Anybody know of soembody that has done one recently? It would be great not to have to leave the boat somehwere for a few weeks while they measure and build one ie: it would great if somebody had one built by a cover builder recently, then I maybe could just oder one.

i would not tow with a cover on. it will shred your paint
get a cockpit cover, then have carrie covers build you a lightweight cover that matches your paint job. it will not harm your paint either.
DO NOT TOW WITH A FULL COVER

Skater Cover
 

Will not tow with it on that's why I said Non Tow cover. I already have a cocpit Cover which works well for Towing.

I had a full cover made with Sunbrella fabric from a local guy and he charged me 2500.00 which i thought was fair SKATER wanted 7500.00 let me know if you need his #
:evilb:

Carrie Covers has built a bunch of them-Should be able to pick out a color & have them send it out to you no problem

I had a custom cover made by Gioia Sails. They make covers for a number of boat builders. Great people.

lakewood NJ

Hey Pro,

Could you ballpark what the full cover for a 32 would cost ? Just ballpark ??

$2000 for the 32B

Pro 1 Have you even had one of those S hooks straighten out?

I have the other straps too. The trailer business was a dealer for MR products.

Yea, they made one for my 28 that looks like an " Afro hair net" said it could be left on while in the water,No holes for Cleats! called Carrie several time and finally gave up.Unless you like thowing away $ call some one else:(

Yea I like the MR tie downs. I would of thought they would of used the stronger snap hook style,Ive seen the S hooks pull loose just riding down the road on a buddies 29 Donzi.

Where do the barrels connect to in the picture ? where can I get them and are they strong? I need 6 for the skater.

The MR S hook style says it for motorcycles ,rated at 2500lbs
http://www.mrproducts.com/index.php?...294&cookie=yes



Car style with snap hook is rated at 5k
http://www.mrproducts.com/index.php?...=70&cookie=yes

I have a set of the MR same as the boat tie down for my race car, Also a set for the Chevelle with axle straps

You can order it with the twist direct bolt style, like above picks .I have the on my Transom, Ratched end on the trailer.

http://www.etrailer.com/Merchant2/gr...19_ratchet.jpg

http://www.etrailer.com/y-248.aspx

CK the ratings on them
http://www.brandsonsale.com/ht-001015.html


S line make some pretty good stuff also,there showing a higher strength.bet there the same though
http://www.s-line.com/Products/cartiedown.htm


I wish they made the ratches and hooks out of stainless,After about 3 years the ratchet has these water spot looking spots on them:(


Hope this helps:D

We make custom Skater covers. I can have one designed in mulitple colors or just one color. We typically use Aqualan versus Sunbrella. But we will be able to work with whatever material you prefer. I will check with my boss and see if he can get me an estimate - we completed his '28 Skater Cover and it is great!

to add to my above comment... we would most likely need your boat to get the best fit for the cover possible.

Pro1 suggested Gioia Sails to me for my cover and DAMN did he hook me up. These are awesome people with a great product, they give you total custom at a great price.

Thanks Pro I owe you a cold one for SURE !!!