Originally Posted by plumbers crack (Post 2563051)

I had the seats all recovered,original back seat and buckets.Mike would have no trouble building you something if you needed it.The side combing pads were traced out of king starboard and bolted on.

The seats wre embroidered with the skater logo as well.

The dash panels were made by a company in missouri,there is a place in florida but we thought the dash material was too thin.We made templates out of plywood (luan) and used a compass to align the guages and holes.

Orignally I wanted black carbon fiber dash with the new silver carbon faced guages by Livorsi,they were not available so I went with black carbon guages and silver dash instead.Im happy with it.Mikes number is 305-323-3697 If you need the dash done ,I can put you in touch with the co .

Originally Posted by ExcaliburHawk40 (Post 2564846)

Looking good. Is this the boat that had the water droplets painted on it years ago?

Originally Posted by cowisl (Post 2565573)

Carbona if my memory serves me right

Originally Posted by lightspeed (Post 2568647)

The Boat Was Owned By John Carbona From Lake Texoma TX ,And It Was Clouds Not Bubbles Painted On The Boat And Yes It Was An Ugly Paint Job

Originally Posted by lightspeed (Post 2568647)

The Boat Was Owned By John Carbona From Lake Texoma TX ,And It Was Clouds Not Bubbles Painted On The Boat And Yes It Was An Ugly Paint Job

Originally Posted by plumbers crack (Post 2584955)

boat ran awesome some pics.