Resto Pics Of My 32 Skater
#32
Registered
Thread Starter
Join Date: Mar 2005
Posts: 604
Likes: 0
Received 0 Likes
on
0 Posts
Hi Philip, When I put a straight edge on the transom it was a little bowed ot in the center of the engines , The new boats 32 are twice as thick @ the Transom as the old boats so with the added weight of a 300 xs vs the old 2.4-2.5 I felt it could only be a good thing and I know what your thinking , your concerned with the added weight . My logic is simple , DO IT ONCE ! Thanks to you and Patrick for the Boat ride !
Larry
Larry
#33
Registered
VIP Member
#35
Registered
Join Date: Nov 2000
Location: NJ
Posts: 560
Likes: 0
Received 0 Likes
on
0 Posts
Oic
Hi Philip, When I put a straight edge on the transom it was a little bowed ot in the center of the engines , The new boats 32 are twice as thick @ the Transom as the old boats so with the added weight of a 300 xs vs the old 2.4-2.5 I felt it could only be a good thing and I know what your thinking , your concerned with the added weight . My logic is simple , DO IT ONCE ! Thanks to you and Patrick for the Boat ride !
Larry
Larry
Philip
#37
Registered
Join Date: Nov 2000
Location: NJ
Posts: 560
Likes: 0
Received 0 Likes
on
0 Posts
#39
Registered
Join Date: Nov 2007
Location: Marlboro, New Jersey
Posts: 489
Likes: 0
Received 0 Likes
on
0 Posts
#40
Registered
Thread Starter
Join Date: Mar 2005
Posts: 604
Likes: 0
Received 0 Likes
on
0 Posts
Got back to work on the boat , installed new Aircraft style fuel fills ( Mock up ) and decided to make some transom changes . I wanted a more modern look so I decided to radius the center section of Transom and will make a mold so I can make a Fiberglass part to make my motorwell smooth like later 32 "S
Larry
Larry