![]() |
Joe,
LCM has both indoor and outdoor storage. That boat is probably inside though. The 32 at Pier 57 had under 100hrs I believe on the boat and motors!! Its all original. The speedo wasnt working but I'd say we ran it up to 100 pretty easily. The tanks have not been done. The drive were upgraded by them from the beginning I believe. The boat is very clean. I'd make them an offer and see what they say. Both boats are sweet! If you know how to run the boat you can make the Bravo's last. Also if you dont run WOT the whole time. Dan |
Dan,
Yes, I would definitely want the tanks done before I take ownership of either of the boats..And obviuosly not at my expense..But it is a great looking boat and I don't mind the Bravo drives as that is basically all I have had in tha last 5-6 years of boating...But I did touch bases with them and they wanted a bit much and not willing to give up much...But it is something to keep in mind..If it doesn't work out with the outboard boat, I will call them up and go from there... Thanks, Joe PS...What has that Motion Run? |
Originally Posted by offshoresteve
(Post 2968562)
I would take it to Skater preiod!! I had my tanks done for 5k, + my time and travel expenses to and from the factory, that was almost 2 years ago. If Peter says 7k then its 7k.Yes it takes some time, but to have it done @ the factory was well worth it to me.When it comes to re -sale I would want Factory tank job over another shop. I know "Ginger" used to work @ Skater and probably does Ok work.
But No One knows the boats like Peter !!! |
Joe would you be interested in a 96 32 A Kevler hull with twin 300's ,full cover , 2 sets of lab prop's ,air dock lift , head phones , trailer , and new gas tanks that have already been done at Skater . the guy is asking 80K & has over 120 K into the boat and the reason for selling is he is getting a 40 . :coolcowboy:
|
Originally Posted by offshoresteve
(Post 2968562)
I would take it to Skater preiod!! If Peter says 7k then its 7k.Yes it takes some time, but to have it done @ the factory was well worth it to me
But No One knows the boats like Peter !!! Take it to Peter & Chris @ SKATER its a HUGE friggin job and they'll get ya done right :coolcowboy: |
Just FYI: I had my tanks done by Skater last Winter, and the price was exactly what was quoted to me from the beginning.:cool:
|
SUE C Q are you the EX employee of Skater also known as "Ginger"? There is a reason someone is an EX EMPLOYEE !!!
|
Originally Posted by offshoresteve
(Post 2969075)
SUE C Q are you the EX employee of Skater also known as "Ginger"? There is a reason someone is an EX EMPLOYEE !!!
|
SUE C Q,
Yes that is a nice skater and it would be something of interest to me.But unfortunately, I have a boat that is going to be part of the deal if it does happen..Anyways, thanks and lets see what happens in the next couple of days... thanks, Joe |
Joe
I built this skater new in 2002 and owned it for a year and a half. Dialed it in at Lake X and can answer any questions you have 6164373852 Parnell |
| All times are GMT -5. The time now is 03:39 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.