|
36 skater project
1 Attachment(s)
It felt really good to cut these holes:ernaehrung004:
|
36 skater project
1 Attachment(s)
After using holesaw to cut holes for gauges, i coated the insides of each hole with clear epoxy, now ready for CF panels
|
36 skater project
1 Attachment(s)
I used a product called E6000 on the back of the CF for adhesion and waterproofing, ran a bead around perimeter and dots around gauge holes. installing gauges at the same time helped draw the panel in nice and tight
|
Looks awesome !!!
|
36 skater project
2 Attachment(s)
Had some time to work a little on the skater over the weekend. I finished installing the center CF panel and speedo.
|
36 skater project
1 Attachment(s)
I finally got to pulling out the latham controls. I'm sending it to Latham and they're going to upgrade the arched base to polished, add throttle and shift lever for quad setup and new polished knobs
|
Cant Wait To See It When Its Finished..thats Gonna Be Bad Ass Boat!!!
|
36 skater project
Thanks, I'd like to get it finished this year
|
36 skater project
3 Attachment(s)
I pulled the boat outside today to see what the completed helm wheel and dash looked like in the sunshine. It was all dusty, but still showed the bling.
I still planning on using the Garmin 5212. Does anyone have any thought on it, for or against? |
Looks great ! It's all coming together.
|
| All times are GMT -5. The time now is 09:38 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.