Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   Skater (https://www.offshoreonly.com/forums/skater-42/)
-   -   36 Skater Project (https://www.offshoreonly.com/forums/skater/227804-36-skater-project.html)

skate 04-04-2013 12:14 PM


Originally Posted by da*****rcury (Post 3898577)
I'm planning on running non ethanol fuel in the skater. Good question though

I had the same plan with my 28 when I got it. It wasn't until the fuel lines started clogging up did I realize that my "Non Ethanol" gas station was a hoax. Be sure of your source.

davidmercury 04-04-2013 04:20 PM

good advice, I'm going to the local airport for avgas

Double Rigged 04-04-2013 04:39 PM

You can buy a pretty inexpensive ethanol tester and check the fuel in your tanks after you buy non-ethonal fuel. Also go on line and check out the ACES fuel additive. The stuff is awesome regarding octane. i have been using it in my motors for over a year with no issues. You can also look up a thread on Scream and Fly where Jay Smith Racing did a bunch of testing using 2.5 motors. He also gave it his approval.

davidmercury 04-04-2013 05:28 PM

Cool DR, thats good to know, I've wondered how effective those additives are

Nice Pair 04-05-2013 10:04 AM


Originally Posted by Double Rigged (Post 3898885)
You can buy a pretty inexpensive ethanol tester and check the fuel in your tanks after you buy non-ethonal fuel. Also go on line and check out the ACES fuel additive. The stuff is awesome regarding octane. i have been using it in my motors for over a year with no issues. You can also look up a thread on Scream and Fly where Jay Smith Racing did a bunch of testing using 2.5 motors. He also gave it his approval.

On extended river runs where I have to buy 87 octane on the water, I add Aces to my fuel. "Very impressive" It runs as good or better than my "street" 91, and the motors run cleaner.

davidmercury 04-06-2013 09:10 AM

great info, I'll be be a volume buyer for sure

davidmercury 04-08-2013 04:36 PM

the one inside stbrd engine's intake gasket was leaking at the bottom and it also had a chipped reed. Ordered new reeds from Marty at Diamond today.

Lake rat Skater 04-08-2013 05:17 PM

That's good to hear you got it figured out, the forecast looks like you might be able to make the first run soon :)

davidmercury 05-17-2013 08:04 AM

the two center engines aren't running right, after talking to Marty it appears to be a vacuum leak causing the idle problems and lack of power. Its been extra hard finding the time to work on it. I'm going to see what I can do over the weekend

skate 06-03-2013 10:04 AM


Originally Posted by da*****rcury (Post 3927191)
the two center engines aren't running right, after talking to Marty it appears to be a vacuum leak causing the idle problems and lack of power. Its been extra hard finding the time to work on it. I'm going to see what I can do over the weekend

Any updates? I can't wait to hear those babies sing!


All times are GMT -5. The time now is 09:37 PM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.