|
Could get it down from 45 easily but wanna make the right choice alll the way around. Anybody chk the boat out at all??? What do invite think would be a good offer if it makes the cut???
|
Originally Posted by Tlihou
(Post 3208522)
Thx for the info lads!!! Greatly appreciated!!! As for the center pod?? Is that a better setup for rough or smooth water conditions??? New to the cat style and boating in general. Getting off the motorbike and on the water for a while. Love the 24 skater as my first choice. What's the fuel tank sizes in either of these boat talon or skaters??? Wife keeps wanting to know!! She's only worried about the operating expenses of owning a twin outboard.
Cheers, |
Originally Posted by Tlihou
(Post 3208527)
Could get it down from 45 easily but wanna make the right choice alll the way around. Anybody chk the boat out at all??? What do invite think would be a good offer if it makes the cut???
Its worth whatever you'll pay for it... Good luck shopping! |
|
I have a set up question. I have a Motion 25 with new 300xs. I now have 13 hours on them and I am only seeing 108. I am turning the props out, bolted to the transom, with offshore midss. The prop centerline is not quite 1 1/2" above and I have lots of water pressure. This week I plan rotating the props in, but I should I also install the manual jack plates. If I had 300x I would but the 300xs' are about 50 pounds heavier.
any ideas, My goal is to get to 112 mph. Oh I am running 15x34 three blade mercury cleavers. |
Originally Posted by jpf091959
(Post 3212088)
I have a set up question. I have a Motion 25 with new 300xs. I now have 13 hours on them and I am only seeing 108. I am turning the props out, bolted to the transom, with offshore midss. The prop centerline is not quite 1 1/2" above and I have lots of water pressure. This week I plan rotating the props in, but I should I also install the manual jack plates. If I had 300x I would but the 300xs' are about 50 pounds heavier.
any ideas, My goal is to get to 112 mph. Oh I am running 15x34 three blade mercury cleavers. |
I am between 6000 and 6100. Redline is around 6300 I think.
|
Who has the 24 skater for sale in Virginia ?
|
Theres more than one in virginia for sale.. Actually theres like 3 or 4 in that are around the coast.
|
2011 Molded In Wind Screen 24ss Race or Pleasure
http://www.screamandfly.com/showthre...ce-or-Pleasure |
| All times are GMT -5. The time now is 09:47 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.