|
Rik??????
3 Attachment(s)
Rik,
I was talking to a guy about a 30' Skater inboard today. He was talking about wanting twin 525EFI Mercury's and Arneson drives. Called Pete and he said a 525/Bravo would run around 115mph, What do you think about a possible project like this and the speeds? Here's a few picture's of a 30'...... |
It should reach 125 to 130 mph with the 525's. It would not need an engine hatch as the engines would be nice and low. If the owner gets the itch a Whipple kit would put this thing into the high 150's if wanted.
|
Originally Posted by Rik
(Post 3197611)
It should reach 125 to 130 mph with the 525's. It would not need an engine hatch as the engines would be nice and low. If the owner gets the itch a Whipple kit would put this thing into the high 150's if wanted.
|
2 Attachment(s)
Most are to large for me to upload. Let's see if these come through
|
5 Attachment(s)
this thing is just "WICKED"!!!!!!!!
|
That skater is OUT OF HAND!!!!!!
Awesome!!! |
drooooooooooooool.....
The 30' skater with whippled 525s and arnesons at 150mph is my dream boat... i could NOT think of a better setup. But as long as we're dreamin, a 388 would fit nicely in the shop too.. |
Originally Posted by waterboy222
(Post 3198130)
drooooooooooooool.....
The 30' skater with whippled 525s and arnesons at 150mph is my dream boat... i could NOT think of a better setup. But as long as we're dreamin, a 388 would fit nicely in the shop too.. Think about this...............a 30' or 32' Skater inboard with Mercury 700SCI's and Arneson drives, 150 to 160mph. That would be a fun little boat. |
Those are pretty good speeds with just 700s, how much faster is the boat with arnesons compared to #6s???
|
Originally Posted by fountain40icbm
(Post 3197965)
this thing is just "WICKED"!!!!!!!!
|
| All times are GMT -5. The time now is 05:39 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.