Originally Posted by KEVLARKAT32 (Post 3309487)

I have a 1988 32 Classic and it is a Vinyl-ester / Kevlar lay-up and checked with the man ( Peter ) on that issue . Simply put any boat layed up with Vinyleter resin are not affected by todays fuel , epoxy and polyester resin have the problems . When they "fix the tanks" on affected boats they use Vinylester resin . My Skater is almost done

Originally Posted by viper1996 (Post 3317599)

I agree! Most of the tank problems were with the 90s up 21s 24s, and 28s...if the unfinished area in the sponsons under dash, hatch, etc. are greenish color you will be good which it most likely be! The poly/epoxy will be yellowish... Al

Originally Posted by Baja555 (Post 3317608)

The tank problems aren't limited to the 21 ,24 and 28's ...all the models are effected from late 1988 until the lamination was changed to prevent the ethanol damage..

Originally Posted by viper1996 (Post 3317599)

I agree! Most of the tank problems were with the 90s up 21s 24s, and 28s...if the unfinished area in the sponsons under dash, hatch, etc. are greenish color you will be good which it most likely be! The poly/epoxy will be yellowish... Al