Offshoreonly.com - My new 28 skater

Page 10 of 11

« First

Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- Skater (https://www.offshoreonly.com/forums/skater-42/)

- - My new 28 skater (https://www.offshoreonly.com/forums/skater/310711-my-new-28-skater.html)

Taboma

01-12-2019 09:06 AM

Quote:

Originally Posted by Australia (Post 4667778)

Hi,
Amazing setup. Im lookjing at cutting some water ramps into my 28. I am wondering where exactly they go on the hull in relation to the gear case. Do they go directly in front, - in the vertical of the X dimension?
Cheers
Aaron

Aaron, Yes they are directly in front of the vertical X axis, centered on it. Mine are about 5/8" wide.

Australia

01-14-2019 12:29 AM

Quote:

Originally Posted by Taboma (Post 4667832)

Aaron, Yes they are directly in front of the vertical X axis, centered on it. Mine are about 5/8" wide.

Thank you sir !!! much appreciated.

Taboma

02-17-2019 05:25 PM

Winter 2019 Upgrade

My Lavorsi LED trim indicator broke late summer. So instead of $850 replacement cost (with not warranty or help from Lavorsi for a faulty product,.. again), I reached out to my go to guy, Ron Muller at Electronics Unlimited, to add a 12" Garmin screen. I think I am pretty much done with the 28!??? Well, maybe.
https://cimg7.ibsrv.net/gimg/www.off...1efcd32086.jpg

After
https://cimg4.ibsrv.net/gimg/www.off...ac00d780a5.jpg

Before

AZMIDLYF

02-17-2019 05:29 PM

Nice..how do you like the new trim paddles as well?

Taboma

02-17-2019 06:21 PM

Paddle Trim

Thanks, With the Trim Sync addition, the right paddle switches are set to operate both engines, sync'ed equally, up and down with touches on the paddles up or down. The left are pre-set to position down about 4* (high speed turn angle as well) and a optimal high speed trim angle (up position) with both engines sync'ed. Really no need to even look at the trim indicators at all. Really makes the driving experience much more fun and safe, IMO.

Rossman

02-17-2019 08:49 PM

Tamoba,
Went to the Miami boat show today and saw those paddle shifters and was quite confused until I read more and saw that they were for controlling trim and or tabs. Looks like a very cool addition! How do you like the screens versus the gauges?

precisiondetails

02-18-2019 02:17 PM

Man It looks really clean and Shiny. You must use awesome detail products. LOL

Taboma

02-18-2019 04:57 PM

Paddle Trim Switches

Quote:

Originally Posted by Rossman (Post 4673199)

Rossman, As you probably deduced, the paddles are nothing more that momentary switches that cam be used control trim functions or any other momentary switch function such as a electric horn or trim tabs as examples. I really like the screens because I can configure each one differently based upon what my needs or desires are at the time, i.e., dialing in set-up changes or navigating a unfamiliar body of water. With the MDC Trim Sync Race Edition, The need to closely monitor the trim positions essentially goes away - I can concentrate on driving and navigating more.

Taboma

02-18-2019 04:59 PM

Detail Products

Quote:

Originally Posted by precisiondetails (Post 4673289)

Man It looks really clean and Shiny. You must use awesome detail products. LOL

I am now addicted to your line of detail products for my boats and autos! My wife is also hooked on them which is a good thing! :gfight:

Double Rigged

02-18-2019 07:27 PM

Quote:

Originally Posted by Taboma (Post 4673169)

Nice Job David!!!!! Looking great
What kind of detailing products are we talking about??????

All times are GMT -5. The time now is 02:38 PM.

Page 10 of 11

« First

Show 40 post(s) from this thread on one page