Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   Skater (https://www.offshoreonly.com/forums/skater-42/)
-   -   New 318 Flatdeck Widebody Outboard build. (https://www.offshoreonly.com/forums/skater/320330-new-318-flatdeck-widebody-outboard-build.html)

Nastybug 02-26-2015 08:36 PM

4 Attachment(s)
Hey all, Here are four more pics from the factory that were sent thru to me today.[ATTACH=CONFIG]537721[/ATTACH][ATTACH=CONFIG]537722[/ATTACH][ATTACH=CONFIG]537723[/ATTACH][ATTACH=CONFIG]537724[/ATTACH]

davidmercury 02-26-2015 09:27 PM


Originally Posted by Nastybug (Post 4271317)
Hey all, Here are four more pics from the factory that were sent thru to me today.[ATTACH=CONFIG]537721[/ATTACH][ATTACH=CONFIG]537722[/ATTACH][ATTACH=CONFIG]537723[/ATTACH][ATTACH=CONFIG]537724[/ATTACH]

I bet you are beyond excited! What is the estimated delivery date now?

Nastybug 02-26-2015 10:14 PM


Originally Posted by da*****rcury (Post 4271338)
I bet you are beyond excited! What is the estimated delivery date now?

Hey David, Completion is still on target for the end of March. Not sure about actual delivery yet. The motors being swapped to the 400Rs isn't supposed to hold up anything as it was discussed a while back already. May go to factory for testing before I take delivery in NJ. Weather is real suspect in April here anyway. If it helps them dial it in I can let them keep it a little longer. Id rather give them the time they need and get it right so I don't have to fiddle around to much after I get it here.

davidmercury 02-27-2015 03:47 AM

It sounds like you will be more than ready when spring gets here. I think that its a good move on your part to have
them dial it in before you get it. Pretty cool that this is the very first one with the 400Rs! We all appreciate the pictures coming!

skate 02-27-2015 06:51 AM


Originally Posted by Nastybug (Post 4271353)
Hey David, Completion is still on target for the end of March. Not sure about actual delivery yet. The motors being swapped to the 400Rs isn't supposed to hold up anything as it was discussed a while back already. May go to factory for testing before I take delivery in NJ. Weather is real suspect in April here anyway. If it helps them dial it in I can let them keep it a little longer. Id rather give them the time they need and get it right so I don't have to fiddle around to much after I get it here.

The weather is much better here in Arkansas during April for dialing a boat in. I'll volunteer my facility and services.

bulletbob 02-27-2015 07:20 AM

Steve, my lake in SC is much closer than Ar-kansas, much cleaner water and much warmer than NJ or Ar-kansas for testing. I will also need a credit card # when cat arrives for testing. No need to thank me thats just the kind of guy I am.

P.S. You Superdave, Sam, Ron and others for graciously letting us live thru your build threads.

flight club 02-27-2015 07:59 AM


Originally Posted by da*****rcury (Post 4271338)
I bet you are beyond excited! What is the estimated delivery date now?

As long as it's ready for Skaterfest Aug 1st. :cool-smiley-026:

SkaterMike82 02-27-2015 09:43 AM

^^^^^^ That's what i'm talking about Ron and right after that LOTO

precisiondetails 02-27-2015 10:57 AM

I say bring it to Desert Storm to show off. Even better weather.

Nastybug 02-27-2015 10:57 AM

Hey guys I appreciate the offers. Ha. When I ordered the boat and then took it over as a wide body I didn't realize they were going to basically build it as a 338 outboard with no bussels. The upgraded dash they used makes it a totally different boat. I thought it was coming with the old cockpit as I was told the cockpit would be the same size as the regular flat deck. The interior is now so different and a bit larger than what I thought was coming. I was in love with the 308 they took to the 2010 Miami Boat Show but the way they did this one is head and shoulders above that in my humble opinion. The guys at skater are great. its nice when you pay for something and it just keeps getting better and better without asking. Ha. I m getting a bit antsy now. Another month and it'll be getting really close. Steve


All times are GMT -5. The time now is 08:24 AM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.