Offshoreonly.com - 400hp Verados Latham Tie Bars

Page 2 of 3

Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- Skater (https://www.offshoreonly.com/forums/skater-42/)

- - 400hp Verados Latham Tie Bars (https://www.offshoreonly.com/forums/skater/328326-400hp-verados-latham-tie-bars.html)

bulletbob

07-11-2015 10:11 AM

I'm pretty sure it's a new build Don with the 400s' in mind. I think both the Skater and DW will rock. I live to run in the rough and slop. I don't personally care about top end, but aired out performance in the rough between 75 to 90 mph. Steve and Troy, as I'm sure I would, will be happy with their cats. You want to haul a$$ buy Sam/Helts 338!
I look forward to the dialing in/ setup on these two.

Double Rigged

07-11-2015 08:50 PM

The boat is brand new. The owner is having Supreme Marine rig it.
It is a 4 seater with canopy. Set up like a race boat.

Feverz29

07-11-2015 09:03 PM

Bullet, I'm not part of Skater nation yet, but which boat is Sam's. I what the classifieds daily.

davidmercury

07-11-2015 09:07 PM

#6 under the skater classlfieds 2014 338 widebody

Maritime_Eng

07-12-2015 06:48 AM

Quote:

Originally Posted by Double Rigged (Post 4328792)

The boat is brand new. The owner is having Supreme Marine rig it.
It is a 4 seater with canopy. Set up like a race boat.

That sounds like a sweet setup! Can't wait to see pictures and hear some numbers!

bulletbob

07-12-2015 08:15 AM

Quote:

Originally Posted by Feverz29 (Post 4328798)

Bullet, I'm not part of Skater nation yet, but which boat is Sam's. I what the classifieds daily.

Me neither brother.............not yet...

davidwademarine

07-13-2015 07:33 AM

Quote:

Originally Posted by Double Rigged (Post 4328548)

When I stand behind the boat it does not look and narrower to me of any significance. Maybe just a touch. Also the way the tie bar is you have to take off the steering tie bar and plates to change the oil.
Not sure when the boat will be done but they are thinking in about two weeks.
It is a 4 seater. I hope to be able to go for a ride with Troy when they test it.

Ron, can you please go into more detail about this. From what I can tell by the pictures, I don't see anything from the tie bar impeding an oil change.

Double Rigged

07-13-2015 06:20 PM

The guys there told me that the lower shroud has to come off and if it is one piece that pulls off to the rear the plate that attaches to the plate on the motors with the bolts has to be removed. The tie bar mounts to the outter plate. They cut the shroud just enough for the plate to come through. I will take another look at again next time I am over there to confrim for you guys. If so not to big a deal as it would come apart pretty easy.

noli	07-16-2015 07:26 AM

.

Who makes that jackplate?

Photo Credit: OSO id [ Double Rigged ]
http://i1238.photobucket.com/albums/...22.44%20AM.png

LAriverratt

07-16-2015 07:36 AM

looks a lot like the ones on mine noli

All times are GMT -5. The time now is 05:19 AM.

Page 2 of 3

Show 40 post(s) from this thread on one page