|
4 Attachment(s)
Well the weather total sucks here. Should be able to run the boat in the steets soon!
Installed a new wheel today and started planning for new updated switch panel/key switches. [ATTACH=CONFIG]548349[/ATTACH] new versus old [ATTACH=CONFIG]548350[/ATTACH] Also found these switches we are now carrying. There is no need to have a fuse block. They have a built in circuit breaker and come in many different amp draws as well as momemtary, or on-off. They also have a blue or red LED indicator. Totally waterproof too! [ATTACH=CONFIG]548351[/ATTACH] [ATTACH=CONFIG]548352[/ATTACH] |
Originally Posted by Double Rigged
(Post 4382556)
Well the weather total sucks here. Should be able to run the boat in the steets soon!
Installed a new wheel today and started planning for new updated switch panel/key switches. [ATTACH=CONFIG]548349[/ATTACH] new versus old [ATTACH=CONFIG]548350[/ATTACH] Also found these switches we are now carrying. There is no need to have a fuse block. They have a built in circuit breaker and come in many different amp draws as well as momemtary, or on-off. They also have a blue or red LED indicator. Totally waterproof too! [ATTACH=CONFIG]548351[/ATTACH] [ATTACH=CONFIG]548352[/ATTACH] |
Originally Posted by Double Rigged
(Post 4382556)
Well the weather total sucks here. Should be able to run the boat in the steets soon!
Installed a new wheel today and started planning for new updated switch panel/key switches. [ATTACH=CONFIG]548349[/ATTACH] new versus old [ATTACH=CONFIG]548350[/ATTACH] Also found these switches we are now carrying. There is no need to have a fuse block. They have a built in circuit breaker and come in many different amp draws as well as momemtary, or on-off. They also have a blue or red LED indicator. Totally waterproof too! [ATTACH=CONFIG]548351[/ATTACH] [ATTACH=CONFIG]548352[/ATTACH] Wheel looks great, very clean. |
You are right Jim. However the adaptor on the new one is plastic and the old was a aluminum one. Not much difference in the end LOL. 4 fenders filled with helium and we are good!
Chris, Inherited the trim switches. They are not bad but use the one on the throttles mostly. Have not run the boat enough to really know just yet. |
Originally Posted by Double Rigged
(Post 4382556)
Well the weather total sucks here. Should be able to run the boat in the steets soon!
Installed a new wheel today and started planning for new updated switch panel/key switches. [ATTACH=CONFIG]548349[/ATTACH] new versus old [ATTACH=CONFIG]548350[/ATTACH] Also found these switches we are now carrying. There is no need to have a fuse block. They have a built in circuit breaker and come in many different amp draws as well as momemtary, or on-off. They also have a blue or red LED indicator. Totally waterproof too! [ATTACH=CONFIG]548351[/ATTACH] [ATTACH=CONFIG]548352[/ATTACH] Oh now those are slick. I have similar but had to run them to a fuse block and relay. I also wanted to have mine laser etched with the control circuit they were powering, but couldn't find a service. these have a LED trim ring, but wish I didn't need a separate fuse block and relay. http://http://s1126.photobucket.com/user/jpf091959/media/SwitchPanel_zps06fea01b.jpg.html?sort=3&o=6 |
They look good in the pics. These have the same LED rings available in blue or red. Amperage ratings range from 5amp up to 20amps in 5amp increments.
Beats having to have relays and another fuse block. Will you know how they work out. Will be rewiring panel as soon as I have it made. |
Originally Posted by Todd D
(Post 4380750)
The impeller is required to be able to idle around and get on plane without over heating the motors and the alarms going off.
Happy to help you with any parts that you need just give me a call. (239)293-4731 Thanks, Todd |
1 Attachment(s)
Well took a chapter out of Kirklands 28 and put some finishing touches in the bilge where you stand and put things. Added some SeaDek with Skater Logos for when dockside. The good thing it all weighed less than a pound!
|
Ron, Your attention to detail is unreal...sweet overhaul!
|
I wish I had a Skater to work/ detail on��
|
| All times are GMT -5. The time now is 10:00 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.