30' Skater Project Let the Journey Begin
#263
Platinum Member
Platinum Member
#264
Registered
Join Date: Sep 2009
Location: Naples, FL
Posts: 37
Likes: 0
Received 0 Likes
on
0 Posts
I'm just giving you a hard time. Look how often I get over there and don't get a chance to stop by....
I luv the comment about the color of the water over here. Everywhere else I go in the state it's nice and clear except for here.
I luv the comment about the color of the water over here. Everywhere else I go in the state it's nice and clear except for here.
#265
Prop update
After reading Steve's post and not doing much with my boat last few months got motivated to finish dialing in this rig. Going to NC in August to run with Rob's new boat. Spoke to Dave Dewald and ordered some new props to try. He is nearing completion of new 5 blade CNC over the hub cleavers. 16 degree rake.
Been running 14.5 diameter 29's. Ordered 32p 15"s to see what happens with a little more engine height.
Hope to have them in the coming weeks along with my new set backs.
Been running 14.5 diameter 29's. Ordered 32p 15"s to see what happens with a little more engine height.
Hope to have them in the coming weeks along with my new set backs.
#266
After reading Steve's post and not doing much with my boat last few months got motivated to finish dialing in this rig. Going to NC in August to run with Rob's new boat. Spoke to Dave Dewald and ordered some new props to try. He is nearing completion of new 5 blade CNC over the hub cleavers. 16 degree rake.
Been running 14.5 diameter 29's. Ordered 32p 15"s to see what happens with a little more engine height.
Hope to have them in the coming weeks along with my new set backs.
Been running 14.5 diameter 29's. Ordered 32p 15"s to see what happens with a little more engine height.
Hope to have them in the coming weeks along with my new set backs.
#267
Registered
Join Date: Sep 2007
Location: League City, Texas
Posts: 74
Likes: 0
Received 0 Likes
on
0 Posts
Double Rigged, I just tried my Dewald over the hub 5 blade 14.5 x 31's on my 30' Spectre with Opti's last month. The boat ran very good. I only have one day of running on them. I am very please with them so far. The mid range is unbelievable. I was running Merc labbed 3 blade cleavers 15X30. I am curious to see how they perform on your boat. Good luck.
#269
Registered
Dale got some 5 blade Dewalds 14 5/8 x 32 for me to try on Saturday morning. If I get even close to your cruise speed I will be thrilled. Your boat looks awesome. I heard Mean Pair might even show up and do a little testing also.
#270
Did a little maintenance on the CMC Set Backs today. removed all bolts and cleaned and greased with Mercury Xtreme Grease. Moved them up and down and greased those threads too. Bolts were gettting a little stiff.
Back to moving like butter. Dialed in height and toe. Ready to test some more props!
Back to moving like butter. Dialed in height and toe. Ready to test some more props!