30' Skater Project Let the Journey Begin
#275
#276
New Hatch Pins
After all the time, money and effort spent on my hatch repair upgrades I realized the hatch pins from Skater were not going to cut it. Found these auto-locking ones from Quik-Latch. They are really nice and work well. However they are not cheap but I feel are worth it. You push down to unlock and lift. Highly recommend the upgrade.
#277
Registered
Very nice, Ron. A great improvement over the "hair pin" type! Did you have to recess the hatch from the bottom side to accommodate the receiver button?
#278
No however the length of pin was about the same as thickness of the hatch. Cut the hole tight and siliconed it in place. Once locked all the force is on the latch anyway.
Going to make a plate to cover the old holes on the inside this week. Will post pics.
Going to make a plate to cover the old holes on the inside this week. Will post pics.
#279
Registered
This Skater is definitely aptly named....but in a great way. Beautiful boat