Did you get the "standard" Skater ramps or did you go with deeper ramps?

Standard Skater ramps

Did you entertain deeper ramps with Pete?

I am lucky to get the boat back, I could never get anyone there to talk to me. Ron has a friend there is how I communicated, thru Ron. Impossible to get Mr. Peter to call back. Delt with Tony to pay my bill. If needed I can make them deeper.

David they are 4" wide and long and about 1/4" deep. I took those measurements of Tom Kennedy's old 24 when it was at TNT. The factory ones that were on my 28 were only about 1" wide 2" long and 1/8" or so deep.

We made my factory water ramps deeper by 1/8" while at Boat Customs and it cured my water pressure issues.

First pic, Toms 24 from his listing.

Second pic, Jim's from earlier in the thread.

[ATTACH=CONFIG]550331[/ATTACH][ATTACH=CONFIG]550332[/ATTACH]

Yea, I get it! Met Pete at LOTO this summer. When I told him I had a 28, he walked away!:lolhit:

Ron, Please clarify on the size. I did not understand your answer. Thanks, David

4" Wide, 4" or from leading edge to transom and 1/4" deep.
Jim should be able to provide exact measurements now that his boat is back.