|
looking for pictures of 32A skater windshields
looking into either a full windshield or just the pop up ones from FINNEYS.COM
found a place on Facebook called Auro Marine but having very hard time getting them to response if they done a 32A or 32B? any suggestions or pictures will help not sure if someone local is better way to go? |
Give me about a year and I’ll have some better pics for ya https://cimg6.ibsrv.net/gimg/www.off...18c1131af.jpeg https://cimg7.ibsrv.net/gimg/www.off...9c5569548.jpeg https://cimg5.ibsrv.net/gimg/www.off...674676126.jpeg https://cimg8.ibsrv.net/gimg/www.off...3b5268d63.jpeg |
A couple of years ago we cut off part of the deck and added a Lee Aerospace wraparound on our 28 Skater.https://cimg3.ibsrv.net/gimg/www.off...a11a205154.jpg
https://cimg7.ibsrv.net/gimg/www.off...46101c9cc6.jpg |
ive done restos on a few 28s and we tried to get areo to send us the bolt on screen for the 28
I finshed the boat rerig and still no screen from them and hard to get a call back so I rigged up and made a plug and mold and made 1 myself for him as I have a 28 also so its a wrap around bolt on fitting on the original deck like a 32a can be done have made em for other 28s since then ive had a few with 32a ask me and I can make u 1 just need a boat to plug off of here at my shop im in Houston area heres the 28 screen and 32a would look similar as the 28 is a small 32a design lmk if interested would like to make a nice 1 for the 32 https://cimg3.ibsrv.net/gimg/www.off...90dc30da5c.jpg |
Great work John! Looks great and I’m sure it makes a significant difference |
tks I did it as a bolt on so no hull modifications are needed to install
to make it an inexpensive alternative to modifying hull to glass in fairing for the lee |
If I hadn’t just picked up a wrap around for my 32A I would be interested in your wind screen for sure! Bolt on would be very nice! I plan to widen my cockpit a bit anywho and I plan on painting the whole boat so I’ll just go ahead and stick with 50X more work for now :bong: |
oh I hear ya,,,,
I have a custom fiberglass shop and built many race boats and remodels through the yrs know time ur spending well,,,,,,,stay at it ur getting there |
Originally Posted by johnmiffco
(Post 4696472)
tks I did it as a bolt on so no hull modifications are needed to install
to make it an inexpensive alternative to modifying hull to glass in fairing for the lee You are spot on. The full wraparound requires a bunch of glass work besides the windshield itself. It was ALLOT of work. You will do well with yours as it looks like great quality, and the only other source for a bolt on (Aero) sounds like they might not be a very good supplier. The only issue that we have had is the “station wagon effect” where the air goes over the glass, but at some point turns around and blows back towards the cockpit. If I am full of fuel I can get gas odors, and I run 300x 2 strokes so I get some odor from them also. I love the power and sound of the X’s, so I need to figure out something. |
Originally Posted by 36Tango
(Post 4696852)
The only issue that we have had is the “station wagon effect” where the air goes over the glass, but at some point turns around and blows back towards the cockpit. Have you played around with a 4-5” flat “wind deflector” like some of the convertible cars have got? https://cimg9.ibsrv.net/gimg/www.off...6ba973a62.jpeg Could always try it with some thin ply and have some folks hold it in place or just mock something up to see if it makes any difference. I think it would look sweet with an engraved Skater logo and some led’s underneath to light it up at night! Just a thought. Could be a PITA to get to the back of the boat aswell. |
| All times are GMT -5. The time now is 06:03 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.