Offshoreonly.com
Page 10 of 11
« First
8
9
10
11
Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   Skater (https://www.offshoreonly.com/forums/skater-42/)
-   -   Skater Registry (https://www.offshoreonly.com/forums/skater/94694-skater-registry.html)

racesdad 07-06-2005 01:01 AM
Re: Skater Registry
 
1 Attachment(s)
1996 and still winning

Slow Ride 08-02-2005 02:03 PM
Re: Skater Registry
 
1 Attachment(s)
28 Skater, Twin 300 PM, 114 gps, Lake St. Clair, Michigan

dreamboater 08-02-2005 02:09 PM
Re: Skater Registry
 
Gorgeous Boat. Are those 300x's or 300's??

Slow Ride 08-02-2005 02:16 PM
Re: Skater Registry
 
1 Attachment(s)
32 Skater B, Triple 300 PM, 116 gps, Lake St. Clair, Mich

Slow Ride 08-02-2005 02:17 PM
Re: Skater Registry
 
300's

dreamboater 08-02-2005 02:58 PM
Re: Skater Registry
 
Originally Posted by Slow Ride
300's
Thats a great number. I have the same setup and have run a best of 109.2 so far. I have not really tested light on fuel but I am thinking around 111-112 with the right air. I am turning 15x34 3blade cleavers and am 1.75 above the bottom. Interested to hear your setup.

Slow Ride 08-02-2005 04:00 PM
Re: Skater Registry
 
14 1/2 x 32 lab 3 blade turning out, 2"up, 5" set back on CMC plates, 6600 rpm, about 9# water pressure, on the edge with heat, one person about 40 gals of fuel and all normal junk in boat. [fresh water, 80 degrees, humid]

offshoresteve 08-02-2005 09:33 PM
Re: Skater Registry
 
Originally Posted by Slow Ride
28 Skater, Twin 300 PM, 114 gps, Lake St. Clair, Michigan

Probably one of the best looking painted 28 I have seen.Looks a hell of alot better than the vinyl on my 28.

dreamboater 08-03-2005 06:33 AM
Re: Skater Registry
 
Originally Posted by Slow Ride
14 1/2 x 32 lab 3 blade turning out, 2"up, 5" set back on CMC plates, 6600 rpm, about 9# water pressure, on the edge with heat, one person about 40 gals of fuel and all normal junk in boat. [fresh water, 80 degrees, humid]
Did you have Rapair do your ECU's?? Do you normally run the motors 2" up, just curious to see how your prop shaft seals do at that height. Thats awesome, thanks for the info.

dank368 08-03-2005 09:03 AM
Re: Skater Registry
 
3 Attachment(s)
here's my new 368, normally boat on Havasu and Mead :D


All times are GMT -5. The time now is 02:55 AM.
Page 10 of 11
« First
8
9
10
11
Show 40 post(s) from this thread on one page


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.