trim master trim tabs fixed by me with photos
 

Hi guys
here is few photos how i fixed my leaking actuator

on this photo u can see one leaky cylinder


http://i302.photobucket.com/albums/n...s/DSCF1995.jpg


and on this photo fix icylinder in wise to undo front nut using it just multi grip .

make sure do not over do it after all it is just plastic



http://i302.photobucket.com/albums/n...s/DSCF1996.jpg





and this is what is in side of cylinder



http://i302.photobucket.com/albums/n...s/DSCF1998.jpg




On this photo u can see two set of seals . Top ones are old ones and new ones are below

http://i302.photobucket.com/albums/n...s/DSCF1999.jpg



and here is piston with new seals

to fit them on just push it with fingers



http://i302.photobucket.com/albums/n...s/DSCF2002.jpg


now just putt all together and fit cylinder back on boat

top up oil and just bleed them by operating up and down few times thay are self bleeding



and here is one fix cylinder like brand new all work takes around 20 min. I hope this will help to someone one day


http://i302.photobucket.com/albums/n...s/DSCF2004.jpg




cheers noluck71

yes that is great info !!!

new seals, where?
 

Hi noluck71!

I'm just doing the same with my trim master trim tabs.
But I have truble to find new seals. Do You remeber were You got the seals from?

Gratful for answer

/P Tegenfeldt, Falun, Sweden

I just got them from local seal store which is just 10 min away from my place

can not remember but cost me les than $10

http://www.sealimports.com.au/contacts.html