| blown formula |
01-29-2003 04:55 PM |
Yes, I have talked to Formula about my older boats. Guess what? They still have total recall of all manufacturing details of their boats, down to the smallest detail. You can still get ORTIGINAL upholstery materials & patterns made for a 12 year old Formula. Replacement parts also, wiring diagrams, everything!
I called Sonic & Jay was the ONLY record of the earlier boats.......
The rebuild is slow because I totally stripped the boat of all pumps, hydraulic, water & fuel lines, all electrical terminal blocks, indicator cables, shift cables & throttle cables, all blowers, pump (water & hydraulic), transom assembly & drive, and of course the engines. I removed over an inch & 1/2 of oil muck in engine bay. Pieces of broken starter solenoids, bolts, uts, clamps,,,,,,etc!!Stripped out some kind of sprayed in asphalt/rubber sprayed coating (like car undercoating). Cleaned & I am still refinishing the engine bay. The motor mounts were bent also & corroded so those came out and are being rebuilt also. The transom/gimbal assembly was completely stripped of all parts, inserted new threads in the bellhousing, gutted the bearings, races, bushings, etc Everything will be new. When done, this should be a great boat.
It's just that in two weeks I will have surgery on my ankle & a cast (non-weight bearing) so I will be on crutches for 2-3 months. I suspect this boat will not be done for this summer. I haven't even been able to find a reasonable 454 Mark IV block yet!! Wish me luck. & thanks for asking!!
|