How to tighten shift cables
 

Have a 358 and when I cruise the star. throttle always like to back off.
I checked the throttle bodies and they seem the same. Is there a adjustment to tighten throttle cables that I am missing? I pulled the shifters up and couldn't
find a adjustment.

Re: How to tighten shift cables
 

What type of sticks do you have? There should be a tension adjustment at the shifters.

Re: How to tighten shift cables
 

What type of sticks do you have? There should be a tension adjustment at the shifters.

Re: How to tighten shift cables
 

I had the same problem you did and called Gaffrig. If stand at the helm and look inside the rubber boot of the shifters you will see an allen screw. Just give this screw a little turn and this will increase the tension on the throttle.

Re: How to tighten shift cables
 

Thanks for the help .I will give it a try.At least now I know my throttle bodies are even!

Re: How to tighten shift cables
 

GO4BROKE The sticks are quicksilver zero effort control
I pulled the rubber up on shifter and could not find a allen adjustment screw
have any ideas?

Re: How to tighten shift cables
 

I'll go look at mine and see what I find. I'll post tomorrow.